Are you looking forward to strengthening the existing wifi signals or want to get rid of wifi dead spots? No matter what the scenario is, the dual band RE6300 range extender from Linksys can solve all the connectivity issues. After successful Linksys RE6300 setup, you’ll no longer face the problem of slow wifi speeds, dead spots, buffering or intermittent connectivity. The range extender delivers fast wifi speeds of upto 750Mbps. It features a WPS button for hassle-free and quick setup. Additionally, there is a smart indicator on its front panel that helps with the installation, placement and also signals if there is any glitch. The RE6300 comes in a simple, direct wall plug design. So it easily blends with the aesthetics of your abode. Thereafter its two external antennas offer wider and dependable connectivity. 

Now to unlock all these features, you have to learn about the Linksys RE6300 setup process. Basically, there are three different methods for the setup that you can follow. 

Method 1: Installation Via WPS

For installing RE6300 using the WPS button, you require a router with the same feature. The installation steps are as follows:

• Find a power outlet which is closest to the router. Plug in the range extender into it. Press the power button. Now wait for the extender to boot up properly. 
• Thereafter, press the WPS button of the host device which is the router. Let its WPS light flicker. 
• Now immediately press the wifi protected button of RE6300. The front panel indicator will blink green. This means the function is enabled and the Linksys RE6300 setup process is under progress. 
• As the smart indicator of the router and the extender stops flickering and turns stable you can conclude that the setup is done successfully. 
• Finally, you just need to reposition the extender. Plug it in a socket which is halfway from the router and halfway from the wifi dead spot. As you power on the device, it will automatically get connected to the router, thus you can start streaming high definition videos or gaming from any nook of the abode. 

Method 2: Web Browser Based Setup

The next method for Linksys RE6300 setup requires two major components one is the smart device and second is information of the existing network that is the SSID and the password. The steps for this particular method are as follows:

• Find a middle point between the router and the wifi dead spot. Plug in the extender into it and activate it. 
• After the extender boots up, take a smart device. Open its settings and then toggle the wifi. 
• Now you’ll have access to all the nearby networks. From the list connect to the network name: Linksys Extender Setup-XXXX. 
• Once the devices are paired, launch the web browser. The browser must be compatible. For no hookups with the remaining Linksys RE6300 setup process, you must clear browser’s caches, cookies and history. 
• Thereafter, head to the browser’s URL blank. Here fill up http://extender.linksys.com and click enter key. 
• With this you’ll now have access to the setup window. The interface will start providing prompts for further setup. So you just need to follow these prompts one by one with precision. You’ll be asked to choose the SSID of the host network and then fill in its password. Do so and once connected, check the connectivity by strolling around the place that previously had no or poor connectivity. 

Method 3: Unlocking RE6300 Via App

Users who wish to configure Linksys RE6300 deeply but quickly as well can use the Linksys application for the Linksys RE6300 setup. The guidance for it is as listed:

• Start by strategically plugging in the extender in an area that is close to the router as well as the wifi dead spot. Then activate it. 
• Now take your smart device. Go to the Play Store if you have an Android device. Search for the Linksys app. On finding, tap on install. iOs device holders can fetch the app from the App Store. 
• Now turn off mobile data and activate wifi instead. As you do so, a list of all available nearby networks will open up. From this list, select the “Linksys Extender Setup-XXXX” SSID and tap on Connect. 
• Finally, open the Linksys app for further Linksys RE6300 setup. Now create a Linksys account by adhering to the app’s instructions. Thereafter, you’ll land on the main setup page. Select the host network’s identity. Fill in the password by ensuring its accuracy. As soon as you hit on Connect, the setup process completes. 

Users who wish to fetch best networking experience from the Linksys RE6300 extender must keep its firmware up-to-date. So before closing down the setup window make sure you look for the updates. 

For other queries and help with the Linksys RE6300 setup you can call, send an email or chat with the experts.